3M ESPE Elipar DeepCure L LED Curing Light

• Wavelength: 430–480 nm
• Number of Curing Modes: 6
• Voltage: 110 V - 240 V, 120 V
• Maximum Light Wavelength: 480 nm
• Minimum Light Wavelength: 430 nm
• Light intensity: 1,470 mW/cm2 (-10%/+20%)
• Power supply: Lithium-ion battery Approx. 120 min. battery runtime (~720 10-sec. cures) with constant light output regardless of battery charge
• Operation: Intuitive two-button and single-mode operation Pre-set cure times: 5, 10, 15, and 20 sec. continuous mode (120 sec.) and tack cure mode
• Curing time: Refer to material instructions; 10 sec. for many composites
• Light guide: 10 mm, black coated, autoclavable, optimal intraoral reach due to the user- and patient-friendly geometry.

• 1 x Elipar DeepCure L LED Curing Light

Preparation:

• Ensure the device is fully charged before use.
• Verify that the light guide is clean and securely attached to the handpiece.

Power On:

• Press the power button on the handpiece to turn on the device.

Select Exposure Time:

• Choose the appropriate exposure time setting for the dental material being cured: 5, 10, 15, or 20 seconds, continuous mode (120 seconds), or tack-cure mode (1 second).

Positioning:

• Direct the light beam towards the area requiring treatment, maintaining a safe distance from oral tissues.

Curing Process:

• Hold the handpiece steady and activate the curing light.
• Ensure proper illumination of the treatment area throughout the selected exposure time.

Post-Curing:

• After curing, deactivate the light and remove the handpiece from the treatment area.

Repeat or Adjust:

• Repeat the process for additional curing as necessary or adjust the exposure time based on clinical judgment.

Power Off:

• Turn off the device by pressing the power button on the handpiece.

Charging:

• Recharge the handpiece by connecting it to the charger when the battery power level indicator shows a steady red light.

Maintenance:

• Clean the light guide and handpiece regularly as per the manufacturer's instructions to maintain optimal performance.

Storage:

• Store the device in a safe and clean environment, placing the handpiece on a flat surface when not in use.

Safety Precautions:

• Follow all safety instructions provided in the user manual to prevent injury or damage.
• Use appropriate protective equipment such as goggles to shield eyes from intense light.

• Country Of Origin: Germany
• Manufacturer: 3M

• Manufacturer/Importer warranty of 1 Year as applicable for this product.
• Service and Warranty are handled by the manufacturer/importer directly for this product
• Dentalkart will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
• Dentalkart and the Buyer acknowledge that the Products purchased/usedare a subject matter of original Manufacturer/Importer’s warranties only
• Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Dentalkart may assist the customer in registering a request to get the Product replaced or serviced.
• The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.