Zhermack Elite Hd+ Soft Putty And Light Body

Elite HD+ is an impression material that combines the effects of nanotechnology with hydrocompatibility, thus guaranteeing high performance in a variety of clinical conditions. The Elite HD+ range allows practitioners to choose between normal and fast set materials to suit their clinical needs or personal preferences. Very high viscosity A-Silicone impression material for fixed prostheses.

Zhermack Elite HD+ Putty Soft Normal Set

Zhermack Elite HD+ Putty Soft Normal Set is a very high viscosity A-Silicone precision impression system. Ideal for fixed prostheses. Suggested technique: two-stage with standard trays.

Characteristics:

• Hydrocompatibility of the fluids
• Thixotropy
• Tear resistance
• At least 99% elastic recovery
• Dimensional stability for up to 15 days
• Biocompatible even on damaged mucosae
• Colour contrast

Advantages:

• Application versatility: the range features 6 different consistencies and 4 different pack types (tubs, tubes, and 1:1 and 5:1 cartridges)
• Impression accuracy and precision: the hydrocompatibility of the washes helps practitioners obtain high-quality impressions
• Impression accuracy and reliability, due to its tear resistance and elastic recovery
• Dimensional stability even after disinfection
• Visual comfort: the colour contrast of the materials with different viscosities facilitates impression interpretation
• Safety for both patient and practitioner: products can be disinfected using disinfectants containing quaternary aluminium salts, mixtures of alcohol and surface tension reducers, whilst maintaining their characteristics of accuracy and dimensional stability even after disinfection.

Zhermack Elite Hd+ Soft Putty Normal Set:

• Delivery system: Manual mixing or 5:1 automatic mixing
• Recommended technique: Double step impression
• Type of setting: Normal Set
• Working time, including mixing time*(min:s): 2:00
• Time in mouth*(min:s): 3.30
• Setting time*(min:s): 5.30
• Elastic recovery: > 99 %
• Linear dimensional change (after 24 h): < 0,20 %
• Hardness (Shore A): 60 ± 2
• Shelf-Life: 3 years

Temperature:

• These times are intended from the start of mixing at 23°C/73°F. Higher temperatures reduce these times, lower temperatures extend them.
• The time in the mouth is intended as at 35°C / 95°F.

Zhermack Elite Hd+ Soft Putty Normal Set 4 x 450ml

• 4 x 450ml Putty Jar
• 2 x measuring spoons

Zhermack Elite Hd+ Putty Soft Normal Set 2 x 250ML

• 1 x 250 ml Base tub
• 1 x 250 ml Catalyst tub
• 2 x Measuring spoons

Zhermack Elite Hd+ Light Body Normal Set (Cartridge) (C203030)

• 2 x 50 ml Cartridges (Base+Catalyst)
• 12 Mixing Tips (Small) 

Zhermack Elite Hd+ Putty Soft Normal Set (4 x 450ML) + Light Body (4x 50ML)

• 4 x 450ml Putty Jar
• 4 x Elite HD+ Light Body Cartridge

Zhermack Elite Hd+ Light Body Normal Set (Tubes) (C203035)

• 1 X 90ml Zhermack Elite HD Base
• 1 X 90ml Zhermack Elite HD Catalyst

• All standard and/or special trays can be used, provided they are rigid and non-deformable. The range of Zhermack’s Hi-Tray impression trays are especially recommended. Proper adhesion of the material to the impression tray is essential to avoid errors, especially during removal from the mouth. To ensure a strong bond, make sure that the adhesive is appropriate for the type and material of the tray.
• Take the 2 components out of the tubs using the colour coded dosing spoons.
• Mix identical proportions of Base and Catalyst; until you obtain a homogeneous mix, with no streaks (about 30 sec.). Then place into the impression tray.
• Contact with latex gloves may prevent polysiloxanes from hardening. Avoid direct or indirect contact with latex gloves, Instead, wash your hands well to eliminate all traces of impurities or use vinyl gloves