Tokuyama Bulk Flow Syringe Refills

• Curing Time: Quick curing in 4mm increments
• Initiator Technology: Radical-Amplified Photopolymerization (RAP) technology
• Filler Composition: 70% by weight (56% by volume) spherical silica-zirconia filler
• Composite Filler: Mean particle size 200nm, particle size range 100-300nm
• Monomers: Includes Bis-GMA, TEGDMA, Bis-MPEPP, Mequinol, Dibutyl hydroxyl toluene, UV absorber
• Shades: Available in U (Universal), A1, A2, A3, B1, U1

• 1 x Bulk Flow Syringe syringe (3.0g/1.8ml)

Preparation:

• Ensure proper isolation and moisture control.
• Prepare the tooth or restoration site according to standard dental procedures.

Dispensing:

• Load the Tokuyama Bulk Flow Syringe Refill into the dispensing instrument.
• Extrude the desired amount of material for the restoration.

Placement:

• Place the material in 4mm increments for efficient bulk filling.
• Adapt the material to the cavity walls for good cavity adaptation.

Light Curing:

• Cure the placed material using a suitable dental curing light.
• Follow the recommended curing time based on the light source's intensity (≥800mW/cm²).

Finishing and Polishing:

• Once cured, finish and polish the restoration to achieve the desired shape and surface smoothness.
• Utilize appropriate dental instruments for finishing procedures.

Check Shade Matching:

• Confirm the shade match of the restoration with adjacent teeth under appropriate lighting conditions.

Post-Curing Verification:

• Verify that the restoration has undergone adequate post-curing for optimal physical properties.

Cleaning:

• Clean the treated area, removing any excess material or debris.

Check Occlusion:

• Verify the occlusion to ensure proper biting alignment.

Patient Instructions:

• Provide post-operative care instructions to the patient, including any precautions or recommendations.

Warranty is not applicable for this product